Tag: Calibration

  • Standard-based Time and Frequency dissemination via wired technologies and its applications (NTP, PTP, WR)

    Standard-based Time and Frequency dissemination via wired technologies and its applications (NTP, PTP, WR)

    Written by: Overview This presentation talks about the synchronization of devices over digital networks. Starting from NTP and PTP, it moves to explaining WR-PTP and HA-PTP, with and emphasis on White Rabbit devices. This Training Is for you if Resources Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has

    Explore →

  • White Rabbit Switch Calibration

    White Rabbit Switch Calibration

    Written by: Overview Procedure and tools for calibrating the White Rabbit Switch. The training provides in-depth explanation of calibration principles and the calibration process. It describes measurement setup, measurement devices and their settings. It descxribes in details calibraiton steps and relevant WR Switch configuration. A spreadsheeth that eases relevant calculations is attached to be downloaded.

    Explore →

  • White Rabbit Switch Configure From Scratch

    White Rabbit Switch Configure From Scratch

    Written by: Overview This presentation contains a hands-on training for configuring your WR Switch from scratch This Training Is for you if Resources Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966, when designers at Letraset and James Mosley, the

    Explore →

  • Comprehensive Intro to WR

    Comprehensive Intro to WR

    Written by: Overview This presentation introduces the genesis and applications of White Rabbit (WR), as well as the basics and components of WR operation. You also got an overview of PTP, WR-PTP, and HA-PTP, and explored L1 syntonization and DDMTD. The presentation then covered WR performance and the different types of WR devices, before introducing

    Explore →

  • WR relative calibration

    WR relative calibration

    Written by: Overview This presentation will guide you through all the intricacies of WR Switch calibration. First of all answering the question: “Do I need to calibrate my devices?”. Then it explain the reasoning and procedure for the calibration of: WR Switch, SFP Modules, Fibers and Coaxial cables. This Training Is for you if Resources

    Explore →

  • WR Switch Advanced

    WR Switch Advanced

    Written by: Overview This presentation presents a series of advanced topics regarding the WR Switch. First of all, it covers all the available techniques for monitoring/management of the switch, using LLDP, SNMP and others. Then it delves into the rest of the CLI tools that were not described in the basic courses.Finally talks about the

    Explore →

  • WR Switch Basics

    WR Switch Basics

    Written by: Overview This presentation will guide on the basics for a White Rabbit Switch: Basic CLI tools and initial configuration of your switch. This Training Is for you if Resources Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry’s standard dummy text ever since 1966,

    Explore →

  • WR Node (WR PTP Core)

    WR Node (WR PTP Core)

    Written by: Overview This presentation will guide you on what are the main modules of a WR Node, how to access and communicate with the softcore and where to find all the necessary information. This Training Is for you if Resources Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum

    Explore →

  • WR Switch and Node Timing Architecture and Implementation

    WR Switch and Node Timing Architecture and Implementation

    Written by: Overview This presentation offers a technical walkthrough of how White Rabbit devices are built and how they achieve sub-nanosecond synchronization. It begins with an overview of WR devices and their architecture across hardware, gateware, software, and firmware, then looks at the timing architecture shared by the WR Switch and WR Node. From there

    Explore →

  • Absolute and in-situ calibration

    Absolute and in-situ calibration

    Written by: Overview The presentation starts from detailing the possible limitation that can be found in the original WR Calibration methods. Absolute calibration, based on work by Peter Janswaijer, avoids the need for golden calibrator and consists in the Electrical to Electrical and Electrical to Optical calibrations. In-situ calibration, for the determination of the alpha

    Explore →